• youtube
  • facebook
  • twitter
page_banner

products

BPO Paste Hardener for Marble Glue Manufacturer

short description:

Hardener(BPO Paste) is widely used to cure epoxy resins. However, simply adding a hardener to an epoxy resin may not cause the epoxy mixture to cure quickly enough. If this is the case a different hardener may be required. Also, hardeners with certain additives can be used. These hardener additives serve as catalysts that speed up the curing process. Hardeners are almost always necessary to make an epoxy resin useful for its intended purpose. Without a hardener, epoxies do not achieve anywhere near the impressive mechanical and chemical properties that they would with the hardener. The correct type of hardener must be selected to ensure the epoxy mixture will meet the requirements of the application.


Product Detail

Product Tags

Specification

Model

50g

80g

100g

120g

Qty per carton

300pcs/carton

200pcs/carton

200pcs/carton

200pcs/carton

Advantages

1.Cure in short time
2.Strong hardness and stable storage
3.Can be operated in cold weather

Usage Condition

1.The best application temperature of this product should be 10℃ above or below the local average temperature.
2.The lowest application temperature of this product should be above 5℃. It needs to take necessary thermal insulation measures if below temperature 5℃.
3.The storage temperature should be less 3535℃. If the room temperature is higher than 35℃, cooling measures shall be taken to ensure the warranty period of this product.

How to Use the BPO Paste

1.Keep the surface to be treated dry, clean and slightly rough.
2.Add 100 parts of the marble adhesive with 1-3 parts hardener, mixing the two ingredients thoroughly and apply in the surface with the tool.

Product Display

100g hardener bpo paste (1)
100g hardener bpo paste (2)

Caution

1.Do not return the mixed glue to the original can;
2.Stored in dry and shady place and keep the lid tightly closed after using;
3.12 months of shelf life (keep away from heat, humidity and sun light);
4.Do not make the bonded parts exposed in wet and frosty place;
5.Clean the tools immediately with special solvent after using;
6.Refer to the application direction on the package before using.


  • Previous:
  • Next:

  • Write your message here and send it to us